Precautions for installation of modified LED recessed lights
Nowadays, there are many types of lighting fixtures on the market, and most people will buy home lighting fixtures according to their home decoration style and hobbies. Recessed LED downlights are available in different sizes and there are many application cases. Let's take a look at the dimensions of the embedded retrofit downlight and its installation precautions.
What are the dimensions of LED retrofit downlights?
2. The size of the embedded retrofit downlight: 4 inches, 5 inches, 6 inches, 8 inches, 9 inches, 10 inches, 12 inches, of which 4 inches, 5 inches, 6 inches, and 8 inches are more commonly used.
1. In terms of installation methods, LED retrofit downlights are mainly divided into two forms, one is surface mounted lights and the other is embedded lights. The surface mounted downlight is a kind of lighting that is directly installed. It has a good decorative effect. The protruding parts are mostly fancy forms. It is suitable for creating a space atmosphere such as a living room. The embedded downlight is a more practical lighting. This kind of lighting needs to make a hole at the top of the ceiling, and then install the tail in it, so that it can be coordinated with the whole of the ceiling.
3. The size selection of the modified led embedded light generally needs to consider its corresponding space, for example, different spaces are suitable for different sizes of embedded lighting. For example, the use of embedded LED lights in the living room is generally about 2.5 inches and 3 inches. Because the overall effect of the living room pays more attention to aesthetics, there are many options for surface installation. The 4 inch recessed light trim is more versatile, except for the living room. There are also options for the size of LED downlights in the bedroom and study room; on the other hand, depending on the lighting effect of the circular embedded LED lights, it is more inclined to a larger size for the weaker light, and the stronger the light. It is a little smaller, and the lighting effect is limited in size to create a better picture and enhance the color rendering performance.
Precautions for LED retrofit downlights
When installing and modifying the LED recessed light, the power supply should be disconnected, and the power valve controlled by it should be closed to avoid electric shock. If possible, you can put some desiccant in the lampshade. When installing the LED downlight in the bathroom, you should place some desiccant to avoid the humid environment affecting the use of the circuit.
The LED retrofit downlight structure includes a front ring, a bracket and a spring sheet. It is characterized in that the locking assembly is embedded in the rail groove of the bracket; the lower ends of the two brackets are symmetrically connected to the front ring through rivets, and the upper end of the bracket is connected to the bracket through screws. The fixing piece is symmetrically connected; the spring piece is symmetrically connected with the bracket fixing piece through screws and clamps the reflector; the lamp holder is connected with the bracket fixing piece through screws; the locking assembly is locked by raising and lowering the lock tongue of the locking assembly In the rail groove of the bracket, the bracket is respectively slidably matched and locked.
Embedded LE downlights are commonly used, and the edges of newly renovated living rooms are almost all circular embedded LED lights.
The above is the introduction of the dimensions of LED recessed downlights and the precautions for refitting LED recessed lights. If you want to know more about the lighting industry information of recessed downlights, please contact us.